Service area
Edinburgh
Edinburgh and the Lothians · enter your postcode and we’ll confirm availability
Designed for your property
What we’ll consider for your Edinburgh property
Edinburgh has Georgian and Victorian flats, stone terraces, villas, colony-style housing and extensive modern development. The practical question is often not simply whether a heat pump can meet the demand, but where equipment can be placed without compromising a listed frontage, shared access or limited internal space.
For heat pump home assessments, The useful first step is to establish whether low-temperature heating is practical for the property. FLO considers the fabric, emitters, hot-water demand, electrical supply and likely outdoor location before recommending a technical survey or final system.
Edinburgh feasibility, permissions and heat-loss survey
Resolve the heritage and shared-building questions before pricing the system
In Edinburgh, a home assessment may need to establish whether an installation route exists before detailed product selection begins. The council’s housing strategy says 66% of homes are flats and almost half pre-date 1945; the city also has 50 conservation areas. An individual address may fall outside all of those complications, but they justify asking about title, listing, elevation and external space at the start. FLO can then measure heat loss, emitters, pipework and hot-water demand while documenting possible outdoor and indoor positions. The assessment should identify facts, assumptions and permissions separately, allowing a homeowner to see what is technically suitable, what requires authority or co-owner confirmation, and what a proper quote must include.
Map planning sensitivity to the proposed alteration
A conservation-area name alone does not decide an application. During your survey, FLO will record the exact address, listing status, visible elevation and proposed equipment position, then identify where City of Edinburgh Council guidance or advice is needed. Photographs and dimensions can support that discussion. This avoids both extremes: declaring all historic property impossible, or assuming permitted development because a unit could physically fit behind the building. Shared-title approval is recorded separately where it applies.
Inspect access before choosing indoor equipment
Narrow stairs, communal doors and protected interiors can constrain delivery and pipe routes as much as the available floor area. A useful assessment measures the proposed cylinder space, access opening and service clearance and traces how pipework could connect without unreasonable damage. It also records the existing hot-water arrangement. These practical observations help the later proposal select equipment that can actually reach, fit and remain maintainable within the building throughout its working life.
Use room evidence instead of an age-based assumption
Two Edinburgh stone properties of the same period can differ through window work, internal insulation, roof exposure and subdivision. The assessment records those differences and measures emitters at the chosen design temperature. An EPC can inform the conversation but does not replace room-by-room work. The resulting schedule should make uncertainty visible and show where further evidence or a targeted improvement would materially change the design. Loft and ground-floor exposure receive their own assumptions.
Local planning information
Edinburgh’s housing mix changes the order of the checks
For a home assessment, this identifies which ownership, fabric or planning question should be answered before equipment is discussed.
Request a £0 home survey and written heat-pump quote in Edinburgh
Share the property basics and the uncertainty you want resolved. FLO will use the first call and survey to assess heat loss, emitters, hot water, electrics and siting. FLO will confirm service availability for the Edinburgh postcode.
What this Edinburgh service includes
- Property and occupancy discussion
- Room-by-room heat-loss inputs
- Radiator and pipework review
- Hot-water cylinder and plant-space checks
- Electrical supply and outdoor-location review
- Clear recommended next step
What the survey will check locally
Older stone homes need careful assumptions for heat loss and ventilation, while renovated properties may contain several fabric standards within one envelope. FLO checks room demand and emitter output together so an attractive EPC or recent refurbishment does not substitute for the actual heating design.
Conservation status, flats, visible elevations and neighbour proximity can affect whether a proposed installation is practical. The survey records potential locations, pipe routes and permissions early, before equipment is finalised.
What happens next
- 01
Initial details
Tell us about the building, present heating and what you would like to do.
- 02
Survey preparation
FLO identifies the areas that need measurement, inspection or evidence at the property.
- 03
Technical visit
The survey examines the heating system, fabric, rooms, plant space, access and potential outdoor position.
- 04
Clear recommendations
The findings inform the system design, any recommended improvements and what should be included in your quote.
Related local services
Other heat pump help in Edinburgh
Nearby areas
FLO welcomes enquiries from Musselburgh, Dalkeith, South Queensferry, Currie, Penicuik, Bonnyrigg and surrounding communities. The property postcode is used to confirm availability.
Answers that may help you decide
Questions people ask
Does FLO provide heat pump home assessments in Edinburgh?+
FLO accepts enquiries for heat pump home assessments in Edinburgh. Availability is confirmed using the postcode, system details and project scope.
What should I include in an Edinburgh enquiry?+
Provide the property type, current heating, postcode and contact details. Existing system owners should also include the make, model, age and any symptoms or fault codes.
Do conservation areas rule out heat pumps in Edinburgh?+
Not automatically. Position, visibility, listing status and the specific planning conditions matter. The local authority should be consulted where the permitted-development conditions are not clearly met.
Can FLO quote for an Edinburgh flat?+
FLO can review the enquiry, but flats need more early information about ownership, outdoor space, access and existing hot-water arrangements than a typical house.
Why is a home assessment important?+
Heat demand, emitter output and installation constraints are specific to the property. A survey reduces the risk of sizing or pricing a system around generic assumptions.
Is an EPC enough to size a heat pump?+
An EPC can provide useful background, but final design should use a suitable heat-loss method and a direct assessment of the heating system and property.