Heat-pump surveys in your area

Mid Calder and Kirknewton

West Lothian Council · surveys available across West Lothian

Call 0800 043 1188
Daikin air source heat pump installed beside a garden and flower planters
Installed by FLO Renewables. Your system will be designed around your own property.

Designed around your home

What your heat-pump survey needs to consider in Mid Calder and Kirknewton

Housing snapshot

West Lothian Council’s LHEES Category 3 table records 128 properties across Mid Calder and Kirknewton, with significant fabric improvement followed by a heat pump suggested for 48. Your survey confirms the present fuel and whether that sequence suits your home.

Heating-system checks

Measure older and altered fabric carefully, identify the existing fuel and wet-system condition, and test whether the outdoor position, electricity supply and hot-water arrangement support a complete conversion.

Planning and siting

Both Mid Calder and Kirknewton appear on West Lothian Council’s conservation-area list. Listing, curtilage, visible elevations and the Scottish permitted-development conditions should be checked against the exact property.

Tell us about your home

Request a £0 heat-pump survey and written quote in Mid Calder and Kirknewton

Tell us about your home and what you want to achieve so FLO can prepare the right survey.

Phone or email (required)

Enter at least one so FLO can respond to your enquiry.

MCS certified · NAP-68987Real FLO installations79 FLO Renewables reviews

What happens next: FLO will review your postcode and property details, then contact you to arrange the right survey and written quote.

Local property details includedFree survey and written quoteNo pressure or obligationMCS certified · NAP-68987Serving Mid Calder and Kirknewton0800 043 1188

Sending this form asks FLO to respond to your enquiry. Privacy policy

What we’ll check at your home

A heat-pump plan designed for your Mid Calder and Kirknewton home

01

Treat two conservation villages as two address checks

Mid Calder and Kirknewton both appear on the council’s conservation-area list, but that does not make every address identical or place every nearby home within a designated boundary. During your survey, FLO will map the property, identify any listing and review the proposed external work from public viewpoints. A village-core property may have tight curtilage and traditional masonry; a home beyond the historic centre may have a later wall system and more siting space. FLO checks the full address and current council mapping so the planning advice reflects the individual property. Conservation status is not an automatic ban, and a rear garden does not automatically mean permission is unnecessary.

02

Plan a complete rural-edge fuel transition

For an oil, LPG or direct-electric property, the work extends beyond the replacement appliance. During your survey, FLO will document existing tanks or storage, flue and boiler removal, the condition of any wet circuit, incoming electrical capacity and the route for a new cylinder or buffer components where the final design requires them. Rural-edge access can affect lifting, base construction and later maintenance even where there appears to be ample land. Tariff and operating assumptions will reflect your household’s actual pattern rather than a generic savings promise. These checks turn a fuel switch into a costed sequence of enabling work, installation and commissioning instead of an incomplete equipment comparison.

03

What council modelling means for your home

West Lothian’s table identifies 128 properties across the named area and suggests significant improvement followed by a heat pump for 48. It highlights the relationship between fabric work and low-carbon heating, but it does not identify each address, its present fuel or any improvements completed since. During your assessment, FLO replaces those unknowns with measured areas, construction evidence, ventilation assumptions, room temperatures and emitter outputs. Your design can then explain which improvements are necessary, which are optional and which should be completed before equipment is finally sized, while keeping the different Mid Calder and Kirknewton settings clear.

Before your survey

Three questions that help prepare your survey

  1. 1

    What fuel is being replaced, and is there already a wet radiator system?

  2. 2

    Is the building listed or within the Mid Calder or Kirknewton conservation area?

  3. 3

    What access, electrical-supply and outdoor-unit positions are realistically available?

Not sure? Tell us what you know and we’ll confirm the rest during your survey.

Nearby areas we cover

Heat-pump enquiries around Mid Calder and Kirknewton

We also welcome enquiries from the nearby communities below. Enter your postcode and we’ll confirm coverage and any local planning checks.

East CalderPumpherstonLivingston VillageWest CalderUphall

Need help nearby?

West Lothian heat-pump servicesInstallation, surveys, servicing and repairsLinlithgowWest Lothian heat-pump guidanceWinchburgh, Bridgend and PhilpstounWest Lothian heat-pump guidanceFLO installation processHow survey, design, quotation and handover fit together

Questions about heat pumps in Mid Calder and Kirknewton

Can a heat pump be installed in Mid Calder or Kirknewton conservation areas?+

Potentially, but the proposed external work needs address-specific review. Conservation status changes the permitted-development position, and a listed building introduces separate consent questions.

Is an oil-heated rural-edge home automatically suitable?+

No. It may present a useful replacement opportunity, but heat loss, radiators, electricity, tank work, access and the complete cost need assessment.

What does the council’s Category 3 result mean here?+

The table records 128 Category 3 properties and assigns 48 to a modelled heat-pump route after significant improvement. It does not certify an individual property.

Independent sources

Scheme rules and guidance can change. Check these sources before making a financial or planning decision.