Local coverage
North and South Lanarkshire
Glasgow-based team · postcode and project availability confirmed at enquiry

Request a £0 heat-pump survey and written quote in Lanarkshire
Leave five essentials now. FLO will confirm local availability, discuss your property and arrange the right survey without making you complete the full enquiry first.
Lanarkshire homes carry a heating history
Read extensions, radiators and pipework before replacing the boiler
Lanarkshire includes town terraces, post-war estates, bungalows, modern developments and rural houses across two council areas. Even neighbouring homes can have different insulation, extensions, radiator replacement histories and pipe sizes. The old boiler’s output does not reveal what a heat pump should be, and an estate name does not reveal how the current distribution system behaves. A useful assessment begins by separating the building’s room-by-room demand from the ability of its radiators and pipework to deliver that heat at a lower operating temperature.
That distinction is especially important in altered family homes. A rear addition may have newer fabric or underfloor heating while original bedrooms rely on older emitters and smaller pipes. Mixed zones have to operate as one coherent system, not as unrelated pieces attached to a new outdoor unit. Hot-water demand, cylinder recovery, controls and electrical capacity belong in the same design. When all of that is made visible, the quotation can show selective changes instead of assuming either that everything must be replaced or that everything can stay.
Locate the weak link in the whole system
These Lanarkshire profiles organise the survey around how the property changed. The aim is to identify whether fabric, distribution, hot water or siting will set the scope before equipment is chosen.
Post-war estate house or bungalow
Note original and replacement windows, insulation work, radiator ages and any microbore or altered pipework known to the homeowner. Bungalows are not automatically simple or unsuitable; their demand, emitter output and hot-water needs still determine the design. Garage, utility and side-garden spaces can offer routes, but clearances and maintenance access must be checked.
Extended or reconfigured family home
Treat the original rooms and later addition as different construction zones before bringing them into one calculation. Record open-plan changes, underfloor loops, zoned controls and rooms that lag behind the thermostat. This helps establish whether radiator changes, pipework work or a revised control strategy is required rather than masking the imbalance with extra capacity.
Traditional town or rural property
Name the gas, oil, LPG or electric system being replaced, because the comparison and enabling work differ. Older fabric needs measured assumptions, while rural homes can add exposure, access and electrical questions. The outdoor position should remain close enough for a sensible route without sacrificing airflow, sound context or service space.
Turn the heating history into a specification
Ask what can remain, what constrains performance and why
Prepare a chronology: original property, extensions or conversions, fabric improvements and changes to boilers, radiators or controls. Add occupancy, hot-water use, current fuel and space for the cylinder and outdoor unit. During the visit, each room’s demand and emitter output can be tested against the proposed flow temperature, while pipe sizes, circuit condition and zones reveal whether the wider system can deliver the design rather than only whether a unit can produce it.
The written quote should make selective retention understandable. Suitable emitters may stay, constrained rooms may need an upgrade, and distribution issues should be named rather than absorbed into vague allowances. Outdoor base, drainage, cable route, electrical work, controls and commissioning should also be explicit. North and South Lanarkshire are different planning authorities; South Lanarkshire lists 30 conservation areas, including Bothwell, East Kilbride Village, Hamilton, Lanark, Strathaven and Uddingston, so the exact address matters.
What matters at your property
Compare designs by their explanation of the house
A credible Lanarkshire proposal should explain the room heat loss, intended temperature, radiator schedule, pipework assumptions, hot-water plan and external position. If a quotation merely mirrors the existing boiler size, it leaves the central design questions unanswered. If the home’s history is unclear, a detailed assessment is the right next step; if it is already documented, ask for the written quote to show how each part affected scope.
The goal is not maximum replacement. It is a heating system in which retained and new components can work together. Describing extensions, persistent cold rooms, current fuel and plant-space limits in the enquiry gives FLO a more useful starting point than a generic request for price, and allows North or South Lanarkshire planning checks to be attached to the correct property from the outset.
Local checks for your property
What we check before your Lanarkshire survey
These published local sources help put the right questions in the right order. They do not replace measurements or decide suitability for an individual address.
Town, estate and rural homes need different starting assumptions
The Scottish Government’s LHEES pilot evaluation highlighted semi-detached and 1919–49 terrace archetypes in North Lanarkshire and modelled heat-pump routes for rural off-gas settlements in South Lanarkshire.
Read the Scottish Government LHEES pilot evaluationPlanning authority: North or South Lanarkshire Council
South Lanarkshire lists 30 conservation areas, including Bothwell, East Kilbride Village, Hamilton, Lanark, Strathaven and Uddingston.
Open the official planning sourceWe’ll confirm the planning, ownership and siting requirements for your exact address before making a recommendation.
Heat-pump planning in Lanarkshire
Local checks to complete before your quote
FLO checks the local planning, property and siting factors that can affect a heat-pump installation in Lanarkshire.
Relevant planning authorities
North Lanarkshire Council · South Lanarkshire Council
FLO checks the current rules for your address before confirming a proposed position.Local survey checks
- Extensions with mixed construction standards
- Existing pipework and radiator output
- Garage, utility and cylinder-space options
Explore real FLO installations and customer reviews. Your survey will confirm what applies to your own home.
Choose the help you need
Heat pump services available around Lanarkshire
Air source heat pump installers
Property-specific air source heat pump assessment, system design, installation, commissioning and aftercare from FLO Renewables.
Explore air source heat pump installation in LanarkshireHeat pump home assessments
A practical home assessment covering heat loss, radiators, hot water, electrical supply, outdoor position and installation constraints.
Explore heat pump home assessments in LanarkshireHeat pump system designers
Heat-loss-led heat pump design covering equipment, emitters, hot water, pipework, controls, electrical requirements and commissioning.
Explore heat pump system design in LanarkshireHeat pump radiator and cylinder upgrades
Radiator, pipework and domestic hot-water cylinder assessment and upgrades for air source heat pump systems.
Explore heat pump radiators and hot-water cylinders in LanarkshireHeat pump controls and aftercare
Heat pump controls guidance, operating review and aftercare for homeowners who want the system to feel easier to understand.
Explore heat pump controls and aftercare in LanarkshireAir source heat pump servicing
Routine air source heat pump inspection, maintenance, performance review and practical controls guidance from FLO Renewables.
Explore air source heat pump servicing in LanarkshireHeat pump repair and fault diagnosis
Air source heat pump fault diagnosis and repair enquiries, with practical information provided before the visit.
Explore heat pump repairs and fault diagnosis in LanarkshireAir-to-air heat pump installers
Air-to-air heat pump assessment and installation for suitable homes and spaces requiring efficient heating and cooling.
Explore air-to-air heat pumps in LanarkshireCommercial heat pump specialists
Commercial heat pump feasibility, system design, phased installation and ongoing support for Scottish businesses and organisations.
Explore commercial heat pump projects in LanarkshireAreas around Lanarkshire
FLO also welcomes property enquiries from the surrounding communities below. Availability is confirmed from the postcode and project requirements.
Nearby FLO coverage
Areas we cover near Lanarkshire
Answers that may help you decide
Questions people ask
Does FLO cover Lanarkshire?+
FLO accepts heat pump enquiries from Lanarkshire and North and South Lanarkshire. Survey and installation availability depends on the postcode, project scope and current schedule.
How do I get a heat pump quote in Lanarkshire?+
Share your postcode, property type and current heating. FLO can then arrange the right survey before preparing a written quote for the complete heating system.
Can funding be included in a Lanarkshire enquiry?+
Yes. Choose the funding-aware quote option or mention funding in your message and FLO can include it in the same property enquiry. Final eligibility remains with the scheme provider.
Can existing radiators be retained in a Lanarkshire home?+
Some often can. Each room needs to be checked against its heat loss and the intended flow temperature rather than replacing every radiator by default.
Does FLO cover both North and South Lanarkshire?+
FLO accepts enquiries across both areas. Survey and installation availability is confirmed from the postcode, service required and current schedule.
